Hotplate Stirrers (Advanced)

Operating Features

Hot Top Warning Indicator on the control panel will blink whenever the top plate temperature is over 50? to prevent accidental injuries.
Overheat prevention circuit turns off the heater if the top plate temperature reaches 450? for any reason.
Virtually no decoupling of magnetic stir bars even with viscous media or at high speeds.
Temperature limit can be set between 50 and 350?.
Thanks to the built-in BLDC motor, stirring action stops instantly when the stirrer is turned off.

Constructional Features

Integrated design of the heater and the top plate provides exceptional heat transfer rate and quick heat up capability.
Fast and precise stirring operations even at high temperatures are enabled by the BLDC motor and a powerful magnet.
Non-slip heating bath with concavo-convex bottom prevents unintentional slips of the bath.
(included for Advanced Models and optional for Basic Models)
A transparent safety shield protects users from liquid splashes or de-coupled stir bars during operations.
(included for Advanced Models and optional for Basic Models)
Two support rods allow for diverse flexibility in configuring other test equipments and accessories.
(included for Advanced Models and optional for Basic Models)

Additional Features of Advanced Models

Constant stirring speed is maintained even when the viscosity of the media changes during operation.
Optimal heating level can be selected by turning the heater scale knob. (from 0 to 100%)
Three timer setting modes (stirring only, heating only, or both) are provided.
To avoid unintentional heating, a separate Heater ON/OFF Button is provided on the control panel.
Welcome To KSE